Setting up a manual stream configuration – AMX MAX-CSE User Manual
Page 51
MAX-CSD10 Web Interface
45
MAX-CSE/MAX-CSD10 Operation/Reference Guide
Setting up a Manual stream configuration
1.
From the Stream Set-up page, choose Manual from the Run Mode drop-down menu. (See FIG. 26.)
2.
Select between UDP and RTP in the Transports drop-down menu.
3.
Enter a new IP address in the Server Address field, if necessary.
4.
Enter a new value in the Server Video Port field, if necessary.
5.
Select between MPEG-2 and MPEG-4 in the Server Video Types drop-down menu.
6.
If you chose RTP in the Transports drop-down menu, enter a new port number in the Server Audio
Port field. If you chose UDP, this field will already be filled and disabled.
7.
Select between MP3 and AAC in the Server Audio Types drop-down menu.
8.
To save your changes, click the Accept button at the bottom of the page. To return to the previously
saved information, click Cancel.
FIG. 26
Stream Configuration Page - Manual Mode