AMX MAX-CSE - Manual (Page 65)

Configuration and Firmware Update
59 MAX-CSE/MAX-CSD10 Operation/Reference Guide
Configuration and Firmware Update
This section refers to steps necessary to both communicate and upgrade the components for both a
MAX-CSE and MAX-CSD10 unit.
Before You Begin
1. Setup and configure your MAX unit.
2. Complete the procedures in the previous Configuring the MAX Communication Parameters section
on page 50 to establish a valid connection between the MAX unit and the web.
3. Complete the procedures in the previous Communicating with the Target Master via an IP section
on page 52 to establish web connection to the target Master.
4. Verify you have installed the latest version of NetLinx Studio on your PC.
5. If an update is necessary, download the latest Studio software by first logging in to www.amx.com
and then navigate to Tech Center > Downloadable Files > Application Files > NetLinx Studio
2.4. This program is used to setup a System number, obtain/assign the IP/URL for the connected
NetLinx Master, and transfer firmware Kit files to the Master.
6. Verify that all cables are securely and properly connected.
7. Verify that the NetLinx Master is receiving power and is turned On.
MAX vs. NetLinx Master - Functional Overlap
Two of the main support procedures can now be done either via NetLinx Studio or directly from the
MAX unit itself:
Querying the unit for a description of its current firmware version
Subsequent firmware Kit file upload and incorporation to a specific MAX unit
Verifying the MAX’s current version of Firmware - via the UI
1. Launch your web browser.
2. Enter the IP Address of the target unit into the web browser’s Address field.
3. Press the Enter key on your keyboard to initiate the communication process and launch the initial
on-screen Enter Network Password security dialog.
4. Enter the current username/password string into the corresponding User name/Password fields.
5. Click OK to enter the information and proceed to the first UI page.
6. Although its the first page displayed in the Active frame after a successful login, the Administration
page can also be accessed by clicking on the Admin button in the Navigation Bar.
7. Locate the Resources section of this page to read the currently installed firmware version.
Verify you are using the latest version of NetLinx Studio (available online at
www.amx.com).
If you have previously setup communication with your Controller via an IP Address,
continue with the firmware update procedures outlined in the Upgrading MAX
Firmware section on page 60.