HP Designjet 3D Printer series - Manual (Page 24)

20 Chapter 9 Supplemental Information
9 Supplemental Information
HP Designjet 3D Removal System
HP Limited Warranty Statement
A. Extent of HP Limited Warranty
1. HP warrants to you, end-user customer, that the HP hardware products, accessories and
supplies specified above will be free from defects in materials and workmanship under
normal usage during the Limited Warranty Period specified above. The Limited Warranty
Period starts on the date of purchase by you. Your dated sales or delivery receipt, showing
the date of purchase of the product, is your proof of purchase date. You may be required to
provide proof of purchase as a condition of receiving warranty service.
2. For software products, HP’s Limited Warranty applies only to a failure to execute
programming instructions for the Limited Warranty Period specified above, due to defects in
material, and workmanship when properly installed and used on the device designated by
HP. HP further warrants that HP owned standard software will substantially conform to
specifications. HP does not warrant that software will operate in hardware and software
combinations selected by you, or meet requirements specified by you.
3. HP does not warrant that the operation of any product will be uninterrupted or error free.
4. HP’s Limited Warranty covers only those defects that arise as a result of normal use of the
HP products, and does not cover any other problems, including those that arise as result of:
a. Improper or inadequate maintenance or calibration;
b. Accessories, software, interfacing, paper, parts, ink or supplies
not provided or supported by HP;
c. Operation outside the product’s specifications;
d. Improper site preparation or maintenance; or
e. Unauthorized modification or misuse.
Routine system maintenance operations in the HP Designjet 3D Removal System, such as
cleaning and preventive maintenance services (including parts contained in any preventive
maintenance kit and HP service engineer visits), are not covered by HP’s Limited Warranty.
5. For HP Designjet 3D Removal System, the use of a refilled or non-original HP consumable
product (cleaning agent bag) does not affect either HP’s Limited Warranty to you or any
HP support contract with you. However, if the system failure or damage is attributable to the
use of a non-HP consumable product, HP will charge its standard time and materials
charges to service the system for the particular failure or damage.
6. If HP or a HP authorized service provider receives, during the applicable warranty period,
notice of a defect in any product covered by this HP’s Limited Warranty, HP shall, at its
option, either repair or replace the defective product which proves to be defective.
HP Product Limited Warranty Period
HP Designjet 3D Removal System 1 year
Suppl
em
ental Inf
orm
ation