HP Storage EVA Capacity Upgrades - Manual (Page 21)

30-10022-01 loop switch user guide 21
Configuring Switch Settings
Several switch configuration settings may be changed to customize the switch to the network
environment. The Switch Configuration page displays general switch settings, switch identification
information, configuration file information, and the SCSI Enclosure Services (SES) AL_PA setting.
To make a change to the current switch configuration, you must know the switch password (the switch
prompts for the password before accepting changes to any configuration settings).
To view the Switch Configuration page, click Switch Configuration.
Viewing and Modifying Switch Information
This section includes general switch identification information.
To change the name, location, or contact name:
1. Click Switch Configuration.
2. Enter the new value in the appropriate text box.
3. Click Submit.
The Switch Configuration page displays the updated information.
Viewing and Modifying Network Configuration Settings
The switch’s network configuration displays the Dynamic Host Configuration Protocol (DHCP),
Ethernet IP address, Ethernet netmask, and default gateway settings. There are two sets of network
Figure 9 Switch Configuration page
Setting Description
Name The name of the switch.
Location The location of the switch.
Contact Name The person or group to contact about the switch.