HP Storage EVA Capacity Upgrades - Manual (Page 38)

38 Switch Management
Changing the Password
The Change Password page enables you to change the password for modifying the switch’s
configuration. The same password is used to access both the Web Manager and the CLI.
Note: Until the default switch password is changed, any user with knowledge of the default password can
make changes to the switch’s configuration.
To change the password:
1. Click Change Password.
The Change Password page is displayed.
2. Enter the new password in the New Password text box.
NOTE: The password must be between 1 and 80 characters in length and is case sensitive.
3. Enter the new password again in the Confirm New Password text box.
4. Click Submit.
A message box is displayed confirming the change to the switch’s configuration and that you
are logged in as an administrator (“admin”).
5. Click OK.
The Enter Network Password box is displayed.
6. Ensure that “admin” is entered for the User Name, and type the current password in the
Password field.
7. Click OK to submit the change.
The page displays the submission update result, and should state that the password was
updated successfully.
NOTE: To view the current page without displaying the submission results, click the View page
without submission results link.
Figure 21 Change Password page