HP Identity Driven Manager Software Series User Manual
Page 43
Using Identity Driven Manager
Configuring Locations
2. Type in a Name for the location
3. Type in a Description for the location
4. Click "New device..." to open the New Device window.
5. Type in the IP address for the device (switch), or select a device from the
pull down list in the "Device name" field. The list includes the ProCurve
switches from the PCM Devices list.
6. Click to select "All ports" on the switch, or use the pull down lists to select
the ports on the device that will be associated with the new location.
N O T E :
If a switch in the device list is not configured to authenticate with the RADIUS
server, the settings in IDM will have no affect.
You can type in an IP address for non-ProCurve devices; however, HP does
not provide support for IDM configurations with non-ProCurve devices.
3-5