HP Identity Driven Manager Software Series User Manual
Page 45
Using Identity Driven Manager
Configuring Locations
4. Edit the Name and Description as needed.
•
To delete a device, select the device in the list, then click
Delete Device.
•
To Modify the device settings, select the device in the list, then click
Modify device...
to display the Modify Device window.
The Modify Device window contains the same fields as the New
Device window. You can edit the ports associated with the location,
or you can choose a different device and reset the ports for the new
device. Click
OK
to save your changes and close the window.
The changes are displayed in the Modify Location window.
5. Click
OK
to save the location changes and close the Modify Locations
window.
Click
Cancel
to close the window without saving the changes. The original
location configuration will be maintained.
N O T E :
When modifying Locations, make sure all devices for the location are config
ured with the appropriate VLANs. If you Modify a Location that is part of a
VLAN (subnet) and that Location is currently used in an Access Policy Group
rule, IDM will check to make sure that the VLAN exists. If not, an error message
is displayed.
3-7