HP Identity Driven Manager Software Series - Manual (Page 51)

Using Identity Driven Manager
Configuring Access Profiles
Creating a New Access Profile
1. Click the "Show Access Profiles" icon on the Global toolbar to display the
Access Profiles window.
2. Click the "Create new Access Profile" icon in the toolbar to display the
"Create a new Access Profile" window.
3. Define the following attributes for the Access Profile.
Name Name used to identify the Access Profile
Description Brief description of the Access Profile
VLAN The VLAN to which access is given. You can type in the VLAN or select
one from the pull-down menu, which lists VLANs configured in PCM.
The DEFAULT_VLAN(1) is equivalent to allowing access across all
segments and switches on the network. If another VLAN is specified,
the user is only allowed access to that network segment.
QoS The Quality of Service, or "priority" that will be given to outbound traffic
under this profile. Select the setting from the pull-down menu.
Bandwidth The rate- limits that will be applied for this profile. Use the up-down
arrows to increase or decrease the Bandwidth.
The default setting is1000 Kbps (1 Mbps)
NOTE: This value will get translated into a percentage of bandwidth
at the switch.
Don’t Override Select this option for any of the Access Profile parameters to use the
current settings at the switch when the user logs in.
Access Profile parameters
4. Click
Ok
to save the Access Profile and close the window.
3-13