Creating new users on management processors, Editing management processor users – HP Systems Insight Manager User Manual
Page 332
To control the system locator:
1.
Select Tools
→Management Processor→HP Integrity and HP 9000 iLO→System Locator. The
System Locator
page appears.
2.
Select target systems and click Next. See
for information on selecting targets. The
Step 2: Select an action
page appears.
3.
Under System locator/Unit Identification LED, select one of the following:
•
On
•
Off
4.
Click Run Now to run the task immediately. Click Schedule to schedule the task to run at another time,
or click Previous to return to the previous System Power page. See
for more
information on scheduling a task.
Related procedure
▲
Controlling system power options through management processors
Creating new users on management processors
This tool enables you to add a new user account to one or more HP Integrity and HP 9000 Integrated Lights
Out (iLO) systems.
To create a new user:
1.
Select Configure
→Management Processor→HP Integrity and HP 9000 iLO→New User. The New
User
page appears.
2.
Select target management processors and click Next. See
for information on selecting
targets. The Step 2: Select an action page appears.
3.
Under Enter properties for a new user account, enter:
•
Login id
(Mandatory) This is the name that must be used when logging into iLO. The maximum
length for a Login Id is 25 characters.
•
Password
(Mandatory) The password must be provided when logging into iLO. The password
must be a minimum of 6 characters with a maximum of 24 characters.
•
Password (Verify)
(Mandatory) The password must be provided a second time for verification.
•
User name
(Mandatory) This name appears in the iLO user list. It is not necessarily the same as
the login name. The maximum allowed length is 25 characters.
4.
Under Access Rights, select the one or more access rights for the user. Usually, a new user is granted
the Console Access right.
•
Console access
•
Power access
•
Management processor configuration
•
User administration
5.
Click Run Now to run the task immediately. Click Previous to return to the previous New User page.
Related procedure
▲
Controlling the system locator LED through management processors
Editing management processor users
This tool enables you to modify an existing user account on one or more HP Integrity and HP 9000 Integrated
Lights Out (iLO) systems.
To modify a user:
332 Tools that extend management