HP Systems Insight Manager - Manual (Page 623)

Description Data Type Column Name
Status of this component; values are: Unknown(0), Other(1),
Powered Off(2), Powering On(3), Inactive(4), Active(5) (A
component is powering on when power has been turned
on, but it is still performing power-on self-tests (POST). A
component is Inactive if it has completed POST, but has not
joined its nPartition. This might be because the component
is not assigned to a nPartition, if it is assigned to a nPartition
and the nPartition is not active, if the component failed
during nPartition boot, if the component was assigned to
an active nPartition and no reboot or shut down for
reconfiguration of the nPartition has been done, or the
component has been configured to remain inactive when
the nPartition boots. A component is active when it has
joined a nPartition during boot. Note that the status of the
component does not imply anything about the state of the
operating system on the nPartition. The component will be
active, for example, while the operating system is still in
the boot process. The status is Unknown if a failure occurred
while getting the data for this component.) SMALLINT ComponentStatus
The number of installed processors that are configured for
use. Processors may be deconfigured by the OS or by
system firmware.
Note: This property may not be available when the cell is
powered off.
SMALLINT CPUCountOK
Amount of functional memory installed on the cell, in
megabytes.
Note: This property may not be available when the cell is
powered off.
BIGINT TotalMemoryOK
Indentifies the type of each cell. Possible values are
Unknown (0), Other (1), Floating (2), Base(3), and Free(4).
User settable. SMALLINT CellType
Partition ID of the nPartition in to which this cell is assigned. INT dc_PartitionID
NVARCHAR(255) R_SlotInCab
NVARCHAR(255) R_SlotID
NVARCHAR(255) R_SlotInCab
HP_NParComplex table
Description Data Type Column Name
LUID uniquely defining this table row BIGINT NParComplex_LUID
Node partly identifies HP_NParComplex BIGINT NodeID
Snapshot partly identifies HP_NParComplex BIGINT SnapshotID
Profile ID of the NPar Complex INT ProfileID
Number of compute cabinets in the complex INT dc_ComputeCabCount
Number of IOX cabinets in the complex INT dc_IOXCabCount
Name of the NPar Complex NVARCHAR(256) ComplexName
Displayable revision string NVARCHAR(256) RevisionString
The maximum number of nPartitions that this complex can
support (For example, an rp7410 system can support no
more than 2 nPartitions.) SMALLINT MaxPartitionsSupported
The serial number of the complex as assigned by the
original manufacturer NVARCHAR(256) CreatorSerialNumber
The name of the product as assigned by the OEM
manufacturer (This property is supported only on
Itanium®-based platforms but might not be present on all
of those.) NVARCHAR(256) CreatorProductName
Database tables 623