On the managed system, On hp sim, On the managed system: on hp sim – HP Systems Insight Manager User Manual

Page 580

Advertising
background image

On the managed system:

For HP-UX 11.11 and 11.23:

WBEMServices A.02.00.09 at a minimum.

Note: Patch is required for both HP-UX 11.11 and 11.23 with WBEM Services A.02.00.09 for HP
SIM to manage correctly.

PHSS_34428 - 11.11 HP WBEM Services A.02.00.09

PHSS_34429 - 11.23 HP WBEM Services A.02.00.09

SFM provider module.

Run #cimprovider -ls.

1.
2.

Verify that the SFMProviderModule is listed.

3.

The following must be installed on the system:

SysMgmtWeb version A.2.2.2 (HP-UX Web Based System Management User Interface)

OpenSSL A.00.09.07e.012 or later

WBEMServices A.02.00.09

WBEM Services CORE Product OnlineDiag B.11.11.16.xx

EMS Version A.04.20

STM Version A.49.10

Note: The SFM providers are not available as part of the core operating system on an old
HP-UX 11.11 installation will not work.

On HP SIM:

Confirm the target system has the correct software installed to support indication subscription and delivery.

1.

Navigate to the System Page for the target system.

2.

Select the System tab.

3.

Expand the Product Description section and verify that WBEM is listed as one of the discovered
management protocols.

If WBEM is not listed, confirm the target system has the correct WBEM credentials assigned to the
managed system.

a.

Navigate to the System Page for the target system.

b.

Select the Tools & Links tab.

c.

Select System Protocol Settings.

d.

Under WBEM Settings, verify the correct credential has been assigned to this system. If it does
not have the correct credentials, manually add them and re-identify the system.

If WBEM is discovered, check the following:

From the CMS, run mxwbemsub -l -n target name . See the

HP SIM 5.1 Command

Line Interface Reference Guide at

http://h18013.www1.hp.com/products/servers/

management/hpsim/infolibrary.html

for examples of using this command.

Additionally, you can use a CIM instance browsing tool to search for the instances created in
the CIMOM that represent the subscription.

A. Enumerate instances of CIM_IndicationSubscription on the managed system.
B.

View all instances of CIM_IndicationListenerCIMXML and look at their destination
URLs to see who subscribed and where they are asking for them to be delivered.

If no subscriptions are found, subscribe to WBEM events for this managed system. If you are still not
receiving indications in HP SIM from this managed system after successfully subscribing, continue with
step 4. See

“Subscribing to WBEM indications”

for information on subscribing to WBEM indications.

4.

If subscriptions are found, verify the HP SIM CMS is reachable from the target system.

580 Troubleshooting

Advertising