HP Integrity NonStop J-Series - Manual (Page 127)

The EmpInfo application is complete now. You can now deploy and verify the EmpInfo application
on a NonStop system, by following the steps described in
“Deploying EmpInfo on NonStop”
(page 129) .
NOTE: The complete code of the EmpInfo application is located in <My SASH
Home>\spring\getting-started\EmpInfo.
To verify if the application is working, complete the following steps:
1.
Start the iTP WebServer and access the index page:
http://<IP Address of the Webserver>>:<<port#>/<servlet directory>/EmpInfo
Figure 37 EmpInfo: Retrieve or Delete Employee Details
2. Click Retrieve or Delete to access the following URL:
http://<IP Address of the Webserver>:<port#>/servlet_jsp/EmpInfo/retrieveordelete.htm">http://<IP Address of the Webserver>:<port#>/<servlet
directory
http://<IP Address of the Webserver>:<port#>/servlet_jsp/EmpInfo/retrieveordelete.htm">>/EmpInfo/retrieveordelete.htm
Figure 38 EmpInfo: Retrieve Screen
Overview of EmpInfo 127