HP Integrity NonStop J-Series - Manual (Page 21)

For information on installing and setting up NSJSP on a NonStop system, see the NonStop
Servlets for JavaServer Pages (NSJSP) 6.1 System Administrator's Guide.
•
NSJSP must be deployed on the NonStop system.
If you have NSJSP deployed on the NonStop system, you should know: ◦
– Location of the iTP WebServer deployment directory under which NSJSP is setup.
This location will be referred to as <NSJSP Deployment Directory>.
– IP Address and Port Number of the iTP WebServer deployment under which NSJSP
is setup.
◦ If you do not have NSJSP deployed on the NonStop system, create your own NSJSP
deployment:
1.
Go to the /usr/tandem/nsjsp/ directory on OSS:
OSS> cd /usr/tandem/nsjsp
2. Select the NSJSP version you want to deploy.
3. Go to the version-specific NSJSP installation directory on OSS:
OSS> cd <NSJSP version>
where,
<NSJSP version> is the version-specific installation directory of NSJSP you want
to deploy.
For example:
OSS> cd T1222H60_30NOV2010_AAO_V610_4
where,
T1222H60_30NOV2010_AAO_V610_4 is the OSS directory where NSJSP is installed.
4. Run the setup script to create your NSJSP deployment:
OSS> ./setup
The setup script guides you through the installation of NSJSP. For more information
on creating the NSJSP deployment, see the NonStop Servlets for JavaServerPages
(NSJSP) 6.1 System Administrator's Guide.
NonStop SQL/MX
You must have SQL/MX version T1050H23 or later installed on the NonStop system.
To verify the version:
1.
Go to the <SQL/MX Installation Directory>/bin directory on OSS.
For example:
OSS> cd /usr/tandem/sqlmx/bin
where,
/usr/tandem/sqlmx/ is the installation directory.
Prerequisites 21