HP LaserJet Pro 400 MFP M425 - Manual (Page 186)

Check toner cartridge status
Print the supplies status page
Information pages reside within the product memory. These pages help diagnose and solve problems with
the product.
NOTE: If the product language was not correctly set during installation, you can set the language manually
so the information pages print in one of the supported languages. Change the language by using the System
Setup menu on the control panel or the embedded Web server.
1. From the Home screen on the product control panel, touch the Setup button.
2. Touch the Reports button.
3. Touch the Supplies Status button to print the report.
Check the supplies status
Check the supplies status page for the following information:
● Estimated percentage of cartridge life remaining
● Approximate pages remaining
● Part numbers for HP toner cartridges
● Number of pages printed
Print a cleaning page
1. From the Home screen on the product control panel, touch the Setup button.
2. Touch the Service menu.
3. Touch the Cleaning Page button.
4. Load plain letter or A4 paper when you are prompted.
5. Touch the OK button to begin the cleaning process.
The product prints the first side and then prompts you to remove the page from the output bin and
reload it in Tray 1, keeping the same orientation. Wait until the process is complete. Discard the page
that prints.
Inspect the toner cartridge for damage
1. Remove the toner cartridge from the product,
and verify that the sealing tape has been
removed.
170 Chapter 8 Solve problems ENWW