HP Identity Driven Manager Software Licenses - Manual (Page 113)

3-49
Using Identity Driven Manager
Configuring User Access
Adding Users to an Access Policy Group
To assign a user to an access policy group:
1. Expand the Domains node, then select the individual Domain to display the
Users tab, or expand the domain to display access policy groups. Click the Users
tab in the individual Domain or Access Policy Group window.
2. Select the users in the list, then click the Add Users to APG button in the toolbar
to display the Select Access Policy Group window.
Figure 3-36. Select Access Policy Group
3. In the Assign selected Users to Access Policy Group field, select the access
policy group to which you want to assign the user(s).
If you select the Default Access Policy Group, users can log into RADIUS servers,
but they are not governed by access policy group rules. IDM will still collect and
display event information for users in the Default APG, as long as they are
authenticated by the RADIUS server.
4. Click OK to save the assignments and close the window.
The new APG assignments are displayed in the Users list.
Domain Domain in which the user logs in
MAC Prefix OUI that allowed the user to access the network through the Auto
Allow OUI configuration
Expiration Time The expiration time for the devices that are registered by guest users.
Device type It is the device that user carries to connect to the network.
Useragent Useragent is the string that contains the end-user information.
Table 3-10. Users list parameters (Continued)
Column Displays...