HP Identity Driven Manager Software Licenses - Manual (Page 197)

4-19
Using the Secure Access Wizard
Using Secure Access Wizard
If a device does not support the selected setting, the value you set will appear
in the SAW display, but will not be configured on that device.
d. Click OK to save the advanced settings and close the window.
e. Click Next in the configuration window to continue to the
Authentication Servers step.
25. The next step for configuring Secure Access Settings is to define the Authenti-
cation Servers that will be used.
Figure 4-14. Secure Access Wizard, RADIUS Servers configuration
The Authentication Servers step lets you enter the IP addresses of the RADIUS
servers to be used for authentication. Most PCM devices support three RADIUS
server, but some, such as the wireless products, supports only two.
Allow address
moves Whether MAC can move between ports. The default is disabled
(No).
Unauth-vid The VLAN to which the port is assigned when the user has not
been authorized by MAC authentication. Valid values are any
defined VLAN, and the default value is VLAN 1.
Auth-vid The VLAN to which the port is assigned when the user has been
authorized by MAC authentication. Valid values are any defined
VLAN, and the default value is VLAN 1.
Option Configures....