HP Identity Driven Manager Software Licenses - Manual (Page 185)

4-7
Using the Secure Access Wizard
Using Secure Access Wizard
Figure 4-4. Secure Access Wizard, Authentication Method Selection example
14. Click the check box to select the authentication method (802.1X, Web-Auth, or
MAC-Auth) to be used for user (client) access to the device.
Click Select All at the top of the column to apply the same authentication method
to all devices that support it. The button works as a toggle between the Select all
and Unselect all options when clicked and is displayed only when more than one
device is listed.
Some devices support simultaneous use of two authentication methods on a single
port. The wizard will allow you to select only the combination of authentication
methods allowed on the device type.
15. Click Next to continue to the Port Selection window.
The Port Selection window lists the devices for which you need to specify the
ports where the access authentication will be applied. You can type each port
number or click Select Ports to select them from a list.