Asus Motherboard M2R32-MVP - Manual (Page 106)

4 - 4 0 4 - 4 0 4 - 4 0 4 - 4 0 4 - 4 0 C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p
After you have set a supervisor password, the other items appear to allow
you to change other security settings.
To set a Supervisor Password:
1. Select the Change Supervisor Password item and press <Enter>.
2. From the password box, type a password composed of at least six
letters and/or numbers, then press <Enter>.
3. Confirm the password when prompted.
The message “Password Installed” appears after you successfully set your
password.
To change the supervisor password, follow the same steps as in setting a
user password.
To clear the supervisor password, select the Change Supervisor Password
then press <Enter>. The message “Password Uninstalled” appears.
If you forget your BIOS password, you can clear it by erasing the CMOS
Real Time Clock (RTC) RAM. See section “2.6 Jumpers” for information
on how to erase the RTC RAM.
Select Screen
Select Item
Enter Change
F1
General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2005, American Megatrends, Inc.
BIOS SETUP UTILITY
Boot
Security Settings
Supervisor Password : Installed
User Password : Not Installed
Change Supervisor Password
User Access Level
[Full Access]
Change User Password
Clear User Password
Password Check
[Setup]
<Enter> to change
password.
<Enter> again to
disabled password.
User Access Level [Full Access] User Access Level [Full Access] User Access Level [Full Access] User Access Level [Full Access] User Access Level [Full Access]
This item allows you to select the access restriction to the Setup items.
Configuration options: [No Access] [View Only] [Limited] [Full Access]
N o A c c e s s N o A c c e s s N o A c c e s s N o A c c e s s N o A c c e s s prevents user access to the Setup utility.
V i e w O n l y V i e w O n l y V i e w O n l y V i e w O n l y V i e w O n l y allows access but does not allow change to any field.