Asus Motherboard M2R32-MVP - Manual (Page 96)

4 - 3 0 4 - 3 0 4 - 3 0 4 - 3 0 4 - 3 0 C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p
IRQ-xx assigned to [PCI Device] IRQ-xx assigned to [PCI Device] IRQ-xx assigned to [PCI Device] IRQ-xx assigned to [PCI Device] IRQ-xx assigned to [PCI Device]
When set to [PCI Device], the specific IRQ is free for use of PCI/PnP
devices. When set to [Reserved], the IRQ is reserved for legacy ISA
devices. Configuration options: [PCI Device] [Reserved]
USB Controller [USB 1.1 and 2.0] USB Controller [USB 1.1 and 2.0] USB Controller [USB 1.1 and 2.0] USB Controller [USB 1.1 and 2.0] USB Controller [USB 1.1 and 2.0]
Allows you to select or disable the USB controller.
Configuration options: [Disabled] [USB 1.1 Only] [USB 1.1 and 2.0]
Legacy USB Support [Enabled] Legacy USB Support [Enabled] Legacy USB Support [Enabled] Legacy USB Support [Enabled] Legacy USB Support [Enabled]
Allows you to enable or disable support for legacy USB devices. Setting to
[Auto] allows the system to detect the presence of USB devices at
startup. If detected, the USB controller legacy mode is enabled. If no USB
device is detected, the legacy USB support is disabled.
Configuration options: [Disabled] [Enabled] [Auto]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.53 (C)Copyright 1985-2005, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
4.4.6 4.4.6 4.4.6 4.4.6 4.4.6 USB Configuration USB Configuration USB Configuration USB Configuration USB Configuration
The items in this menu allows you to change the USB-related features.
Select an item then press <Enter> to display the configuration options.
The M o d u l e V e r s i o n M o d u l e V e r s i o n M o d u l e V e r s i o n M o d u l e V e r s i o n M o d u l e V e r s i o n and U S B D e v i c e s E n a b l e d U S B D e v i c e s E n a b l e d U S B D e v i c e s E n a b l e d U S B D e v i c e s E n a b l e d U S B D e v i c e s E n a b l e d items show the
auto-detected values. If no USB device is detected, the item shows
N o n e
N o n e N o n e N o n e N o n e.
USB Configuration
Module Version - 2.24.0-11.4
USB Devices Enabled:
None
USB Controller [USB1.1 and 2.0]
Legacy USB Support [Enabled]
USB 2.0 Controller Mode [HiSpeed]
BIOS EHCI Hand-off [Enabled]
USB Mass Storage Device Configuration