Asus Motherboard M2R32-MVP - Manual (Page 45)

A S U S M 2 R 3 2 - M V P A S U S M 2 R 3 2 - M V P A S U S M 2 R 3 2 - M V P A S U S M 2 R 3 2 - M V P A S U S M 2 R 3 2 - M V P 2 - 2 1 2 - 2 1 2 - 2 1 2 - 2 1 2 - 2 1
2.6 Jumper
1 . 1 . 1 . 1 . 1 . C l e a r R T C R A M ( C L R T C ) C l e a r R T C R A M ( C L R T C ) C l e a r R T C R A M ( C L R T C ) C l e a r R T C R A M ( C L R T C ) C l e a r R T C R A M ( C L R T C )
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS.
You can clear the CMOS memory of date, time, and system setup
parameters by erasing the CMOS RTC RAM data. The onboard button cell
battery powers the RAM data in CMOS, which include system setup
information such as system passwords.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Remove the onboard battery.
3. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the
cap on pins 2-3 for about 5~10 seconds, then move the cap back to
pins 1-2.
4. Reinstall the battery.
5. Plug the power cord and turn ON the computer.
6. Hold down the <Del> key during the boot process and enter BIOS
setup to re-enter data.
Except when clearing the RTC RAM, never remove the cap on CLRTC
jumper default position. Removing the cap will cause system boot failure!
You do not need to clear the RTC when the system hangs due to
overclocking. For system failure due to overclocking, use the C.P.R. (CPU
Parameter Recall) feature. Shut down and reboot the system so the BIOS
can automatically reset parameter settings to default values.
M2R32-MVP
®
M2R32-MVP Clear RTC RAM
CLRTC
Normal Clear CMOS
(Default)
1 2 2 3