Creating a raid 0 configuration – Asus Motherboard M2R32-MVP User Manual
Page 142
5 - 2 8
5 - 2 8
5 - 2 8
5 - 2 8
5 - 2 8
C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t
Creating a RAID 0 configuration
Creating a RAID 0 configuration
Creating a RAID 0 configuration
Creating a RAID 0 configuration
Creating a RAID 0 configuration
To create a RAID 0 set:
1.
In the Main Menu, press <2> to enter the “Define LD” function.
2.
Press <Enter>, and the following screen appears.
FastBuild (tm) Utility (c) 2004-2005 ATI Technology, Inc.
[
↑↑↑↑↑]Up [↓↓↓↓↓]Down [ESC]Exit [Space] Change Option [Ctrl-Y]Save
[ Keys Available ]
[ Define LD Menu ]
[ Define LD Menu ]
Channel:ID
Drive Model
Capacity (MB) Assignment
1:Mas xxxxxxxxx
xxxxxx
Y
2:Mas xxxxxxxxx
xxxxxx
Y
3:Mas xxxxxxxxx
xxxxxx
N
4:Mas xxxxxxxxx
xxxxxx
N
3.
Highlight the L D 1
L D 1
L D 1
L D 1
L D 1 item and press <Space> to select R A I D 0
R A I D 0
R A I D 0
R A I D 0
R A I D 0.
4.
Move to the A s s i g n m e n t
A s s i g n m e n t
A s s i g n m e n t
A s s i g n m e n t
A s s i g n m e n t item by using the down arrow key and set
Y
Y
Y
Y
Y to any two of the drives .
4.
Press <Ctrl+Y> to save the setting. The utility prompts the following
messages:
Press <Ctrl+Y> to key in the desired capacity or press any key to
continue.
6.
The utility displays the following screen.
FastBuild (tm) Utility (c) 2004-2005 ATI Technology, Inc.
[ Define LD Menu ]
[
↑↑↑↑↑]Up [↓↓↓↓↓]Down [ESC]Exit [Enter] Select
[ Keys Available ]
LD No RAID Mode Total Drv Capacity(MB) Status
LD 1 RAID 0
2
xxxxxx Functional
LD 2 ----
----
---- ----
LD 3 ----
----
---- ----
LD 4 ----
----
---- ----
LD 5 ----
----
---- ----
LD 6 ----
----
---- ----
LD 7 ----
----
---- ----
LD 8 ----
----
---- ----
LD No RAID Mode Total Drv
LD 1
RAID 0
2
Strip Block: 64 KB
Fast Init: OFF
Gigabyte Boundary: ON
Cache Mode: WriteThru
Press Ctrl-Y to Modify Array Capacity or press any other key
to use maxinum capacity...
Press <Ctrl+Y> to erase MBR or press any key to continue.
Press Ctrl-Y if you are sure to erase MBR! Press any other
key to ignore this option...