ACR Electronics Nauticast Y1-03-0212 User Manual
Page 45
Installation Manual
41
Y1-03-0212 Rev. E
Select Submenu 3 “Persons on Board” with cursor button [Up] & [Down] or by pressing Nr. 2
on the keyboard.
Note:
The total number of persons on board will b
e calculated automatically. In “High Seas” mode
this sum will be used for the AIS messages.
How to use this menu to transfer PoB
– information will be described in detail in the User Manual.
Select Submenu 4 “Destination” with cursor button [Up] & [Down] by pressing Nr. 4 on the
keyboard.
Select between mask input and direct input of the destrination string.
Mask input:
Scroll the Data Fields with [Enter] and input the UN destination codes as well as the ETA
(estimated time of arrival) data.
Save the new settings by pressing [Save], and return to the Main Menu Screen by pressing
[Exit]. Press [Back] to return to the Main Menu without saving any changes.
N 1
o
18' E 0
o
12' |1>0.01|2>1.30|3>1.80nm
************* PoB Settings *************
Crew Members:0-254 (255 = unknown = default)
Passenger :0-8190(8191= unknown = default)
S. Personal :0-254 (255 = unknown = default)
--------------------------
Total :nnnn Members
M6: Send addressed PoB Message
M7: Broadcast PoB Message
----------------------------------------
Num| Save |Addressed |Broadcast | Exit
N 1
o
18' E 0
o
12' |1>0.01|2>1.30|3>1.80nm
************* Destination***************
use mask [*]/[ ] input string
UN Country :NL
UN Location :DOR
Fairway section:02552
Terminal code :LEUVE
Fairway hector :00000
ETA(MMDDhhmm) :10/31 10:05
----------------------------------------
| Save | | | Exit