ACR Electronics Nauticast Y1-03-0212 - Manual (Page 54)

Installation Manual 50 Y1-03-0212 Rev. E
6 Accessories
The following material is included with the NAUTICAST.
1 NAUTICAST Inland AIS Transponder
1 installation manual, 1 user Manual
3 caps of plug
1 cable clamp (M5 thread)
1 guide plate Kit
3 angles + 3 mounting screws (screw bolt + square nut)
The NAUTICAST Inland AIS is supplied with some of the components listed below (contents
depend on customer requirements).
PRODUCT
NUMBER PRODUCT DESCRIPTION
AIS Cable
2610 AIS Interface Cable (Power & Data) between Transponder and Connection Box & Pilot Plug, 3
meters (9.8ft) Halogen Free, IP67
2611 AIS Interface Cable (Power & Data) between Transponder and Connection Box & Pilot Plug, 10
meters (32.8ft) Halogen Free. IP67
2614 AIS Interface Cable (Power & Data) between Transponder and ECS, 1.5 meters (4.9ft)
2617 AIS Interface Cable (Power & Data) between Transponder and PC 1.5 meters (2 sensor only)
GPS/VHF Cable
2612 GPS/VHF Interface Cable, 1meter (3.3ft) Includes 1 each Female N and TNC connectors installed
and 1 each Male N and TNC connectors for RG214 cable (specify length) Not Required with P/N
2624 VHF/GPS Combi Antenna.
2613 GPS/VHF Interface Cable, 10 meters( 32.8ft) Includes 1 each Male PL & TNC connector installed.
(Not Required with P/N 2624 VHF/GPS Combi Antenna.)
ACR VHF Antenna Solution
2628 VH-3200 VHF Stainless Steel Whip Antenna 91.4cm (36in) Includes Mounting Kit & Plug PL Male
for RG214
2621 Comrod AV 7 VHF Fiberglass Antenna 1.22m(4ft) Includes Aluminum mount (Vert or Horiz..
stanchion, or bulkhead) When used with P/N 2612, 1 P/N 2632 PL Male Connector & P/N 2630
cable (specify length) are required.
ACR GPS Antenna Solution
2622 ProCom GPS4 Quadrifilar Helix Antenna 5 Volt. When used with P/N 2612 interface, one P/N
2633 TNC Connector & P/N 2630 cable (Specify length) are required. Mount P/N 2623 is required.
2623 ProCom FLG Deck Mounting Kit Metal Horiz.. surface (for P/N 2622)
ACR VHF/GPS Combination Antenna Solution (in lieu of individual VHF and GPS antenna
solutions)
2624 Comrod AC17 Combi Antenna (combined GPS/VHF) includes Aluminum mount (Vert or Horiz..
Stanchion or bulkhead) & 1m interface cable. If longer cable required, order P/N 2630 cable
(specify length) and 2 P/N 2631 Male N connectors. P/N 2612 or 2613 are not required with this
option.
Optional VHF/GPS Antenna Cable extensions and Plugs (select or supply own cable)
2630 GPS/VHF RF Antenna Cable extension cable RG214 (No Plugs) Sold per meter
2631 N Male RG214 Crimp
2632 PL Male RG214 Crimp
2633 TNC Male RG214 Crimp
Optional AIS Cable Connection Box (Required for Advanced Installation with ECDIS, etc.)
2640 Connection Box
Optional 12vt to 24vt DC to DC Converter ( Required for 12vt power systems)
2642 12v to 24v DC to DC Power Converter.
Optional Mounting Bracket Assemblies for UAIS Nauticast™
2650 Mounting Bracket Gimbal Style (Includes 4 screws and 2 Mounting Knobs)
2651 Retro Fit Frame Drop In Mount (Includes 3 screws, nuts, clips to hold display to bracket)
2652 Frame for Rack Mount. 48.3cm (19in) Includes 3 Bolts and Nuts to hold display to bracket.
Discontinued