HP StorageWorks XP Remote Web Console Software - Manual (Page 18)

Description Item
LDKC number, CU image number, and LDEV number of a logical volume.
These numbers are delimited by colon (:). indicates a normal logical volume.
indicates an expanded LU (that is, a LUSE volume).
indicates a command device.
indicates command device security.
indicates a remote command device.
If an LDEV number ends with #, the logical volume is an external volume.
If an LDEV number ends with V, the logical volume is a virtual volume for XP
Snapshot.
If an LDEV number ends with X, the logical volume is a virtual volume for XP
Thin Provisioning.
LDKC:CU:LDEV
ID of a logical volume from the host.
If a UUID is not specified, this column becomes blank.
NOTE: When you set a UUID from a host, a character which is not contained
in the ASCII character set is converted to a blank space automatically.
UUID
The emulation types for each logical volume (or logical device).
For LUSE volumes, an asterisk (*) and a number appear on the right of
emulation types. For example, OPEN-9*3 indicates that three OPEN-9 volumes
are combined.
Emulation
Displays the size of each logical volume. Capacity
RAID level for each logical volume.
If the logical volume is an external volume or a virtual volume, the RAID column
does not display the RAID level, but displays a hyphen (-) instead.
When the parity groups are combined, an asterisk (*) and a number appear
on the right of the RAID level. For example, 5(7D+1P)*2 indicates that two
parity groups are combined.
RAID
Displays names of parity groups. If the name begins with E, the group is an
external volume group consisting of one or more external volumes.
If the name begins with V, the group is an V-VOL group consisting of one or
more virtual volumes for XP Snapshot.
If the name begins with X, the group is an V-VOL group consisting of one or
more virtual volumes for XP Thin Provisioning.
When the parity groups are combined, an combined parity group appear in
the square brackets ([ ]). For example, 9-7[9-8] indicates that 9-8 is combined
with 9-7.
Parity Group
Number of alternate paths, if any. Paths
Access attribute of each logical volume. Access Attribute
Encryption status of each logical volume.
Enable indicates that the logical volume is encrypted.
Disable indicates that the logical volume is not encrypted.
If the logical volume is an external volume, a virtual volume for XP Snapshot,
a virtual volume for XP Thin Provisioning or a LUSE volume, the Encryption
column displays a hyphen (-).
Encryption
Below the table is the number of logical volumes selected in the table.
18 Using the LUN Manager GUI