Changing the fibre channel lu path settings, Changing wwns and nicknames of host bus adapters – HP StorageWorks XP Remote Web Console Software User Manual
Page 59
6.
Click the Apply button in the Authentication window.
A message appears and asks if you want to apply the setting to the storage system.
7.
Click the OK button to close the message.
The setting is applied to the storage system.
To return the Fibre Channel switch setting so that the switch cannot authenticate hosts, perform the
same operation, but select the Authentication :Enable->Disable menu in step 5.
Changing the Fibre Channel LU Path Settings
Changing WWNs and Nicknames of Host Bus Adapters
In Fibre Channel environments, host bus adapters can be identified by WWNs or nicknames.
To change the WWN and/or the nickname of a host bus adapter:
1.
Start LUN Manager and display the LUN Manager window (
Selecting Icon under Fibre Folder)” (page 13)
).
2.
In the tree, double-click the Fibre folder to open the folder.
A list of Fibre Channel ports appears.
3.
In the tree, double-click the Fibre Channel port to which the desired host bus adapter is
connected.
4.
In the tree, select and right-click a host bus adapter ( ).
5.
Select Change WWN & Name from the pop-up menu.
The Change WWN & Name dialog box (
“Change WWN & Name Dialog Box” (page 60)
appears.
6.
To change the WWN, enter a new WWN or select another WWN in the WWN list.
To change the nickname, enter a new nickname in the Nickname box.
7.
If necessary, check Apply this change to other ports, too.
If this check box is checked, the change in the dialog box will also affect other ports. For
example, suppose that the same host bus adapter (that is, the same WWN) is located below
ports CL1-A and CL2-A in the tree. If you select the host bus adapter (or the WWN) from
below one of the ports and change the nickname to hba1, the host bus adapter below the
other port will also be renamed hba1.
NOTE:
The change in the dialog box will not affect any port that satisfies one of the following
conditions:
•
The resulting nickname is already used as the nickname of a host bus adapter connected
to the port.
•
The resulting WWN exists in the port.
8.
Click the OK button to close the Change WWN & Name dialog box. If a message appears
and asks if you want to continue the operation, click the OK button.
The changes are indicated in blue in the tree.
Changing the Fibre Channel LU Path Settings
59