HP StorageWorks XP Remote Web Console Software - Manual (Page 50)

3. In the Port tree, select a port or host group on which you want to register user information for
a host.
The user information for hosts currently registered on the selected port or host group appears
in the Authentication Information (Host) list.
You can register user information for a host even if the port status is disable . In this case,
however, the registered user information is ignored.
4. Right-click any point in the Authentication Information (Host) list.
5. Select Add New User Information from the pop-up menu.
The Add New User Information (Host) dialog box ( “Add New User Information (Host) Dialog
Box” (page 50) ) appears. In this dialog box, specify the following user information for the
host to which you want to connect.
•
Group Name
Specify the group name of host bus adapter. Select the name from the list. The list includes
the group names of all host bus adapters physically connected to the selected port.
•
User Name
Specify the WWN of the host bus adapter in up to 16 characters.
You can use alphanumeric characters in a user name.
•
Secret
Specify the secret (that is, a password used in CHAP authentication) in 12 to 32 characters.
You can use alphanumeric characters, spaces, and the following symbols in a secret:
. - + @ _ = : / [ ] , ~
•
Re-enter Secret
Specify the secret again for confirmation.
•
Protocol
Specify the protocol used in the user authentication. This protocol is fixed to CHAP .
6. Click the OK button to close the Add New User Information (Host) dialog box.
The specified user information for the host is added in blue in the Authentication Information
(Host) list of the Authentication window.
7. Click the Apply button in the Authentication window.
A message appears and asks if you want to apply the setting to the storage system.
8. Click the OK button to close the message.
The setting is applied to the storage system.
Figure 31 Add New User Information (Host) Dialog Box
50 Performing LUN Manager Operations