HP StorageWorks XP Remote Web Console Software - Manual (Page 104)

Second Error Check
In the second check, the spreadsheet settings are verified. Any errors found are displayed on the
Error Information list. This second check is performed before the Apply button becomes available.
“Second Error Check Flow Chart” (page 105) shows the flow of the second check.
The second error check consists of two different types of the checks. These checks are shown in
“Second Error Check Flow Chart” (page 105) as the Level 1 and Level 2. The Level 2 check is
performed only when no error is found by the Level 1 check. Each level of the check of the second
error check detects the following errors:
•
Level 1 check (the format and parameters are checked):
A function tag is not supported. ◦
◦ A setting value is incorrect or omitted.
◦ The setting range is incorrect. The correct ranges are as follows:
LDKC:00
CU:00 - FE
LDEV:00 - FF
LUN: 0000 - 07FF
Group ID: 00 - FE
Host Mode: 00 - 4F
•
Level 2 check:
The current settings are compared to the imported settings and checked for logical consistency.
Note that certain errors can only be detected by the third check.
When you import a spreadsheet with no errors detected, the window displays Ready above the
error information list, and the Apply button becomes available.
104 Performing LUN Manager Operations Using Configuration File Loader