HP StorageWorks XP Remote Web Console Software - Manual (Page 84)

7. Click the Apply button in the LUN Manager window.
A message appears and asks if you want to apply the setting to the storage system.
8. Click the OK button to close the message.
The change in the security settings is applied to that storage system.
Disabling LUN Security
CAUTION: Do not disable LUN security on ports when host I/O is in progress.
To disable LUN security on a port:
1. Start LUN Manager and display the LUN Manager window ( “LUN Manager Window (When
Selecting Icon under Fibre Folder)” (page 13) ).
2. In the tree, locate the desired port.
3. See the text on the right of the port name to find LUN security status.
•
If LUN security is disabled, you do not need to go through the remaining steps in this
procedure.
•
If LUN security is enabled, go to the next step.
4. Select and right-click the port.
5. Select LUN Security: Enable -> Disable from the pop-up menu.
A message appears informing you that only host group 0 (group #00) will be available if
LUN security is disabled.
6. Click YES to close the message. A key is removed from the port icon.
7. Click Apply in the LUN Manager window. A message appears and asks if you want to apply
the setting to the storage system.
8. Click OK to close the message. The change in the security settings is applied to that storage
system.
If LUN security is disabled on a port, the host groups corresponding to that port are grayed out in
the tree (except for host group 0).
Configuring the Storage System for Using RAID Manager
The system administrator can enter RAID Manager commands from open-system hosts to perform
XP Continuous Access and/or XP Business Copy operations on logical devices. For example, RAID
Manager commands can be used to create and split pairs. To enable the system administrator to
enter RAID Manager commands from open-system hosts, you must specify at least one logical
device as the command device. You can also apply command device security to other logical
devices in the storage system.
NOTE: If a storage system is divided into SLPRs, and you want to prevent RAID Manager
commands from affecting multiple SLPRs, you must apply command device security to the logical
volumes.
Specifying Logical Devices as Command Devices
To enable the system administrator to execute RAID Manager commands from an open-system
host, you must select at least one logical device that will not be manipulated by XP Continuous
Access or XP Business Copy, and then specify the device as the command device. When an RAID
Manager command is issued from a host, the command is received by the command device. The
command device transfers the command to another logical device. Then, the command performs
an XP Continuous Access or XP Business Copy operation on that logical device.
To specify a logical device as a command device:
84 Performing LUN Manager Operations