Releasing command device security, Setting uuid – HP StorageWorks XP Remote Web Console Software User Manual
Page 86
3.
Select Cmd. Dev. Security: Disable -> Enable from the pop-up menu.
A message appears asking if you want to apply command device security.
4.
Click the OK button to close the message.
5.
Click the Apply button in the LUN Manager window.
A message appears and asks if you want to apply the setting to the storage system.
6.
Click the OK button to close the message.
The settings are applied to the storage system.
Related topic
To remove command device security from a logical device, you must select and
right-click the logical device (
) in the upper-right LU Path list or the lower-right
LDEV list and then select Cmd. Dev. Security: Enable -> Disable from the pop-up
menu.
Releasing Command Device Security
To release command device security:
1.
Start LUN Manager and display the LUN Manager window (
Selecting Icon under Fibre Folder)” (page 13)
).
2.
In the upper-right LU Path list or in the lower-right LDEV list, select and right-click the desired
command device.
The
icon indicates a logical volume to which command device security is already applied.
3.
Select Cmd. Dev. Security: Enable -> Disable from the pop-up menu.
A message appears.
4.
Click the OK button to close the message.
5.
Click the Apply button in the LUN Manager window.
A message appears and asks if you want to apply the setting to the storage system.
6.
Click the OK button to close the message.
The settings are applied to the storage system.
Setting UUID
You can set an arbitrary ID to identify a logical volume from the host. This ID is called UUID .
To set a UUID:
1.
Start LUN Manager and display the LUN Manager window (
Selecting Icon under Fibre Folder)” (page 13)
).
2.
In the tree, double-click a port. The host groups corresponding to the port appear.
3.
In the tree, select a host group. The LU Path list shows information about LU paths associated
with the selected host group.
4.
In the LU Path list, select one or more LUNs to which volumes are assigned (if a volume is
assigned to a LUN, the columns on the right of the LUN column are not empty). When plural
LUNs are selected, the same UUID is set to all selected LUNs.
5.
Right-click the selection and then select Set UUID. The Set UUID window opens (
Window (When a OpenVMS Server Host is Used)” (page 87)
and
a Server Host Other Than OpenVMS is Used)” (page 88)
).
6.
In the Set UUID window (see
“Set UUID Window (When a OpenVMS Server Host is Used)”
and
“Set UUID Window (When a Server Host Other Than OpenVMS is Used)”
86
Performing LUN Manager Operations