HP Color LaserJet Enterprise CP4525 Printer series - Manual (Page 53)

Item Sub-item Sub-item Sub-item Description
AUTO* The print server uses auto-negotiation to
configure itself with the highest link speed
and communication mode allowed. If auto-
negotiation fails, either 100TX HALF or 10T
HALF is set depending on the detected link
speed of the hub/switch port. (A 1000T half-
duplex selection is not supported.)
10T HALF 10 Mbps, half-duplex operation.
10T FULL 10 Mbps, full-duplex operation.
100TX HALF 100 Mbps, half-duplex operation.
100TX FULL 100 Mbps, full-duplex operation.
100TX AUTO Limits auto-negotiation to a maximum link
speed of 100 Mbps.
1000T FULL 1000 Mbps, full-duplex operation.
Table 2-1 Embedded Jetdirect menu (continued)
ENWW Control panel menus 39