HP Color LaserJet Enterprise CP4525 Printer series - Manual (Page 55)

Item Sub-item Values Description
PAPER PATH SENSORS Performs a test on each of the
product’s sensors to determine if
they are working correctly and
displays the status of each sensor.
PAPER PATH TEST Tests the paper-handling features
of the product, such as the
configuration of the trays.
PRINT TEST PAGE Generates a page for testing the
paper-handling features. You must
define the path for the test in order
to test specific paper paths.
SOURCE ALL TRAYS
TRAY 1
TRAY 2*
TRAY 3
TRAY 4
TRAY 5
Specifies whether the test page is
printed from all trays or from a
specific tray.
DUPLEX OFF
ON
Determines whether the duplexer
is included in the test.
NOTE: This option is available
only for models that have an
automatic duplexer.
COPIES 1*
10
50
100
500
Determines how many pages
should be sent from the specified
source as part of the test.
MANUAL SENSOR TEST Performs tests to determine
whether the paper path sensors are
operating correctly.
MANUAL SENSOR TEST
2 Performs additional tests to
determine whether the paper path
sensors are operating correctly.
COMPONENT TEST A list of available components
appears. Activate individual parts
independently to isolate noise,
leaking, and other hardware
issues.
PRINT/STOP TEST Range is 0 - 60,000 milliseconds.
The default is 0. Isolates print quality faults more
accurately by stopping the product
in mid-print cycle, which allows you
to see where the image begins to
degrade. This causes a jam
message that might need to be
manually cleared. A service
representative should perform this
test.
ENWW Control panel menus 41