HP Color LaserJet Enterprise CP4525 Printer series - Manual (Page 174)

3. Press the up arrow or down arrow / to select the ON or OFF setting, and then press the OK
button.
4. Press the Home button .
Set sleep delay
1. Press the Home button .
2. Open each of the following menus. Press the down arrow to highlight it and then press the OK
button to select it.
a. CONFIGURE DEVICE
b. SYSTEM SETUP
c. SLEEP DELAY
3. Press the up or down arrow / to select the appropriate time period, and then press the OK button.
4. Press the Home button .
Wake time
The wake time feature allows you to instruct the product to wake at a certain time on selected days, to
eliminate waiting for the warm-up and calibration periods. You must have the SLEEP MODE setting on
to set the wake time.
NOTE: Make sure that the real-time clock is set to the correct date and time before you set the wake
time.
Set the real-time clock
Use the real-time clock feature to set the date and time settings. The date and time information is
attached to stored print jobs, so you can identify the most recent versions.
Access the DATE/TIME menu 1. Press the Home button .
2. Open each of the following menus. Press the down arrow to highlight it and then
press the
OK button to select it.
a. CONFIGURE DEVICE
b. SYSTEM SETUP
c. DATE/TIME
Set the date 1. From the DATE/TIME menu, highlight and select the DATE menu.
2. Press the up arrow or down arrow / to select the year, month, and day. Press the
OK button after each selection.
Set the date format 1. From the DATE/TIME menu, highlight and select the DATE FORMAT menu.
2. Press the up arrow or down arrow / to select the date format, and then press the
OK button.
160 Chapter 9 Manage and maintain ENWW