HP Color LaserJet Enterprise CP4525 Printer series - Manual (Page 190)

If it does not print, turn the product off, and then uninstall and reinstall the print server card to ensure
that it is completely seated in the slot.
8. Perform one of these steps:
● Choose the correct port. See the computer or operating system documentation for
instructions.
● Reinstall the software, choosing the network installation this time.
Clean the product
Over time, particles of toner and paper accumulate inside the product. This can cause print-quality
problems during printing. Cleaning the product eliminates or reduces these problems.
Clean the paper path and print-cartridge areas every time that you change the print cartridge or
whenever print-quality problems occur. As much as possible, keep the product free from dust and debris.
To clean the print-cartridge area and the product exterior, use a soft, water-moistened cloth.
Clean the paper path
1. Press the Home button .
2. Press the up arrow or down arrow / to highlight the CONFIGURE DEVICE menu, and then press
the
OK button.
3. Press the up arrow or down arrow / to highlight the PRINT QUALITY menu, and then press the
OK button.
4. If the product has automatic two-sided printing, go to step 5.
If the product does not have automatic two-sided printing, press the up arrow or down arrow /
to highlight the CREATE CLEANING PAGE option, and then press the
OK button. Follow the
instructions on the printed page.
5. Press the up arrow or down arrow / to highlight the PROCESS CLEANING PAGE option, and
then press the
OK button. The cleaning process takes several minutes.
6. Discard the printed page. The task is complete.
176 Chapter 9 Manage and maintain ENWW