HP Color LaserJet Enterprise CP4525 Printer series - Manual (Page 33)

Menu item Sub-menu item Values Description
RESTRICT COLOR USE ENABLE COLOR*
COLOR IF ALLOWED
DISABLE COLOR
This menu item controls the
authorization of color printing.
DISABLE COLOR: All jobs sent
to the product print only in
monochrome.
ENABLE COLOR: All color
pages sent to the product print in
color.
COLOR IF ALLOWED: A
permissions database is
referenced to verify if color pages
are printed in color or
monochrome.
COLOR/BLACK MIX AUTO*
MOSTLY COLOR PAGES
MOSTLY BLACK PAGES
These menu selections allow you
to balance the trade-off between
supply life and performance.
AUTO: The product software
uses an algorithm based on
printing data to achieve the best
output.
MOSTLY COLOR PAGES: This
selection provides the highest
performance. If most of the
printing is in color, this selection
will not negatively affect supply
life.
MOSTLY BLACK PAGES: This
selection conserves the most
supply life and is the best choice
if most of the printing is done in
black and white.
Configure device menu
The CONFIGURE DEVICE menu allows you to change the default printing settings, adjust the print
quality, change the system configuration and I/O options, and reset the default settings.
Printing menu
These settings affect only jobs without identified properties. Most jobs identify all of the properties and
override the values set from this menu.
To display: Press the Home button , select the CONFIGURE DEVICE menu, and then select the
PRINTING menu.
NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no
default.
ENWW Control panel menus 19