HP Color LaserJet Enterprise CP4525 Printer series - Manual (Page 37)

Print Quality menu
To display: Press the Home button , select the CONFIGURE DEVICE menu, and then select the
PRINT QUALITY menu.
NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no
default.
Item Sub-item Sub-item Values Description
ADJUST COLOR HIGHLIGHTS CYAN DENSITY
MAGENTA
DENSITY
YELLOW DENSITY
BLACK DENSITY
Range from +5 to
–5. Default is 0. Adjust the darkness or lightness of highlights
on a printed page. Lower values represent
lighter highlights on a printed page, and
higher values represent darker highlights on
a printed page.
MIDTONES CYAN DENSITY
MAGENTA
DENSITY
YELLOW DENSITY
BLACK DENSITY
Range from +5 to
–5. Default is 0. Adjust the darkness or lightness of midtones
on a printed page. Lower values represent
lighter midtones on a printed page, and
higher values represent darker midtones on
a printed page.
SHADOWS CYAN DENSITY
MAGENTA
DENSITY
YELLOW DENSITY
BLACK DENSITY
Range from +5 to
–5. Default is 0. Adjust the darkness or lightness of shadows
on a printed page. Lower values represent
lighter shadows on a printed page, and
higher values represent darker shadows on
a printed page.
RESTORE COLOR
VALUES Restore the color settings by resetting the
density values of each color.
SET REGISTRATION For each tray, setting the registration shifts
the margin alignment to center the image on
the page from top to bottom and from left to
right. You can also align the image on the
front with the image printed on the back.
ADJUST TRAY <X> Perform the alignment procedure for each
tray.
When it creates an image, the product scans
across the page from side to side as the
sheet feeds from top to bottom into the
product.
PRINT TEST PAGE Print a test page and instructions for setting
the registration of the image location.
ENWW Control panel menus 23