HP Color LaserJet Enterprise CP4525 Printer series - Manual (Page 71)

Priority for print settings for Mac
Changes to print settings are prioritized depending on where the changes are made:
NOTE: The names of commands and dialog boxes might vary depending on your software program.
● Page Setup dialog box: Click Page Setup or a similar command on the File menu of the program
you are working in to open this dialog box. Settings changed here might override settings changed
anywhere else.
● Print dialog box: Click Print, Print Setup, or a similar command on the File menu of the program
you are working in to open this dialog box. Settings changed in the Print dialog box have a lower
priority and do not override changes made in the Page Setup dialog box.
● Default printer driver settings: The default printer driver settings determine the settings used in
all print jobs, unless settings are changed in the Page Setup, Print, or Printer Properties dialog
boxes.
● Printer control panel settings: Settings changed at the printer control panel have a lower priority
than changes made anywhere else.
Change printer-driver settings for Mac
Change the settings for all print jobs
until the software program is closed Change the default settings for all
print jobs Change the product configuration
settings
1. On the File menu, click the Print
button.
2. Change the settings that you want
on the various menus.
1. On the File menu, click the Print
button.
2. Change the settings that you want
on the various menus.
3. On the Presets menu, click the
Save As... option and type a name
for the preset.
These settings are saved in the
Presets menu. To use the new settings,
you must select the saved preset option
every time you open a program and print.
Mac OS X 10.4
1. From the Apple menu , click the
System Preferences menu and
then click the Print & Fax icon.
2. Click the Printer Setup button.
3. Click the Installable Options
menu.
Mac OS X 10.5 and 10.6
1. From the Apple menu , click the
System Preferences menu and
then click the Print & Fax icon.
2. Select the product in the left side of
the window.
3. Click the Options & Supplies
button.
4. Click the Driver tab.
5. Configure the installed options.
ENWW Software for Mac 57