HP Color LaserJet Enterprise CP4525 Printer series - Manual (Page 82)

4. When the software prompts you, connect the USB cable to the product and the computer.
5. To configure the product software to recognize the installed accessories, complete these steps:
Mac OS X 10.4 1. From the Apple menu , click the System Preferences menu and then
click the Print & Fax icon.
2. Click the Printer Setup button.
3. Click the Installable Options menu.
Mac OS X 10.5 and 10.6 1. From the Apple menu , click the System Preferences menu and then
click the Print & Fax icon.
2. Select the product in the left side of the window.
3. Click the Options & Supplies button.
4. Click the Driver tab.
5. Configure the installed options.
NOTE: For Mac OS X 10.5 and 10.6, the installation procedure should
automatically configure the installed options.
6. Print a page from any program to make sure that the software is correctly installed.
NOTE: If the installation failed, reinstall the software.
Connect to a network
You can configure network parameters from the control panel, the HP Embedded Web Server, or for
most networks, from the HP Web Jetadmin software.
NOTE: HP Web Jetadmin software is not supported on Mac OS X operating systems.
For a complete list of supported networks and for instructions on configuring network parameters from
software, see the HP Jetdirect Embedded Print Server Administrator’s Guide. The guide comes with
products in which an HP Jetdirect embedded print server is installed.
Supported network protocols
The product supports the TCP/IP network protocol, the most widely used and accepted networking
protocol. Many networking services utilize this protocol. The following tables list the supported
networking services and protocols.
68 Chapter 5 Connect the product ENWW