Manually configure ipv6 tcp/ip parameters from the – HP Color LaserJet Enterprise CP4525 Printer series User Manual
Page 90
Manually configure IPv6 TCP/IP parameters from the control panel
Use the control-panel menus to manually set an IPv6 address.
1.
Press the
Home
button .
2.
Open each of the following menus. Press the down arrow to highlight it and then press the
OK
button to select it.
a.
CONFIGURE DEVICE
b.
I/O
c.
EMBEDDED JETDIRECT MENU
d.
TCP/IP
e.
IPV6 SETTINGS
f.
ADDRESS
g.
MANUAL SETTINGS
h.
ENABLE
i.
ON
j.
ADDRESS
3.
Press the up arrow or the down arrow to select the first character of the address. Press the
OK
button.
Repeat this process for each character in the address.
NOTE:
You must press the
OK
button after entering each character.
4.
Press the up arrow or the down arrow to select the stop character . Press the
OK
button.
5.
Press the
Home
button to return to the Ready state.
76
Chapter 5 Connect the product
ENWW