HP Photosmart 8250 Printer - Manual (Page 17)

Paper type How to load Tray to load
2. Slide the paper-width and
paper-length guides to
their outermost positions.
3. Load paper with the side
to be printed facing down.
Check that the stack of
paper is no higher than
the top of the paper-
length guide.
4. Adjust the paper-width
and paper-length guides
inward until they stop at
the edges of the paper.
5. Push in the Main tray all
the way in.
6. Make sure the light on the
Photo tray button is
turned off to enable
printing from the Main tray.
Load paper and adjust guides inward
1 Paper-width guide
2 Paper-length guide
Push in the Main tray
1 Push the Main tray all the way in
Photo paper up to
10 x 15 cm
(4 x 6 inch) with or
without tabs,
Hagaki cards, A6
cards, L-size cards 1. Remove the Output tray.
2. Adjust the paper-width
and paper-length guides
outward to make room for
the paper.
3. Load up to 20 sheets of
paper into the Photo tray
with the side to be printed
facing down. If you are
using tabbed paper, insert
the paper so the tab feeds
in last.
4. Adjust the paper-width
and paper-length guides
inward until they stop at
the edges of the paper.
5. Replace the Output tray.
6. Make sure the light on the
Photo tray button is
turned on to enable
printing from the Photo
tray.
Load the Photo tray
Remove Output tray and adjust
guides outward
1 Output tray
2 Paper-width guide
3 Paper-length guide
(continued)
HP Photosmart 8200 series User's Guide 13