HP Photosmart 8250 Printer - Manual (Page 37)

The HP iPod defaults to the Windows file structure. To check if your HP iPod was
formatted for Windows, go to Settings > About on your HP iPod. If it was
formatted in Windows, it displays Format Windows at the bottom of the screen.
If it was not formatted in Windows, you must connect the HP iPod to a Windows
PC using the USB cable that came with the HP iPod and follow the onscreen
instructions.
Note HP iPods that have only been connected to a Macintosh are not
compatible with the printer; however, after connecting to a Windows PC,
Macintosh users can still fully synchronize their HP iPods back to
Macintosh and Mac iTunes and maintain printer support.
To import photos to an HP iPod
1.
Copy photos from a memory card to your HP iPod using the Belkin Media Reader
for iPod.
2. Verify that photos are on your HP iPod by selecting Photo Import on the HP iPod
menu. Photos appear as Rolls.
To print photos from an HP iPod
1.
Connect the HP iPod to the camera port on the front of the printer using the USB
cable that came with the HP iPod. The printer screen displays Reading Device
for up to several minutes while the photos are read. Then the photos appear on
the printer screen.
2. Select the photo(s) you want to print and press Print. For more information on
selecting photos, see
Selecting photos to print .
If you are unable to print to the HP Photosmart printer using your HP iPod, please
contact HP Customer Care. See
HP Customer Care .
HP Photosmart 8200 series User's Guide 33