HP Deskjet 842c Printer - Manual (Page 10)

10
5 Slide both paper adjusters to fit snugly against the paper’s
edges. Make sure the paper lies flat in the tray and that the
paper fits under the tab of the paper-length adjuster.
6 Slide the IN tray all the way back in.
Flip the OUT tray back down if it’s up.
Step 6: Install the printer software
Before you can use your new HP DeskJet printer, you must
install the printer software on the computer from which you will
print. Your printer software is located on the CD included with
your printer.
From time to time, Hewlett-Packard provides updated printer
software. Go to “Printer Software” on page 54 for information
on obtaining updated printer software.
Before You Begin
1 Make sure the computer is fully set up and operational.
2 Make sure that the printer is properly set up and ready to
print using the instructions provided earlier.
3 Make sure that the printer is connected to the computer with
a parallel printer cable and that no peripheral devices (such
as scanners, backup units, and switch boxes) are installed
between the printer and the computer.
4 Make sure both the printer and the computer are turned on.