Usb step 2: plug in the power – HP Deskjet 842c Printer User Manual
Page 15
Advertising
15
2
Open the top cover. Remove both pieces of plastic packing
material from the inside of the printer.
3
Close the top cover.
USB Step 2: Plug in the power
1
Leave the computer and the printer turned off.
2
Lift the cable access door on the back of the printer.
3
Plug the power adapter cord firmly into the connector on the
back of the printer.
4
Plug the appropriate end of the power cord into the power
adapter.
Note:
Do NOT connect your USB cable between the printer
and the computer. Make sure that the USB cable is NOT
plugged into the computer at this point in the setup.
Advertising