HP ProLiant SL2500 Scalable System - Manual (Page 85)

CLI commands 85
Shows the current syslog IP address configuration. This command does not show the actual contents of
the syslog.
Show name
• Command:
SHOW NAME
• Description:
Displays the rack name.
Show power
• Command:
SHOW POWER
SHOW POWER <PORT#>
SHOW POWER <PORT#> <DMPORT#>
SHOW POWER PDM
SHOW POWER ALL
where:
<PORT#> refers to the HP APM, PDM1, or PDM2 port numbers.
<DMPORT#> refers to the HP APM Distribution Module port number or the HP Intelligent Modular PDU
Extension Bar outlet number.
• Description:
o Shows the rack power status.
o SHOW POWER ALL shows the HP Power Management Controller Utility hardware and firmware
versions as well as the license status of all servers in the enclosures.
Show rack
• Command:
SHOW RACK
SHOW RACK <PORT#>
SHOW RACK <PORT#> <DMPORT#>
SHOW RACK ALL
where:
<PORT#> refers to the HP APM port.
<DMPORT#> refers to the HP APM Distribution Module port.
• Description:
o Shows the contents of the rack.
o SHOW RACK ALL shows the HP Power Management Controller Utility hardware and firmware
versions as well as the license status of all servers in the enclosures.