HP Color LaserJet Pro MFP M476 series - Manual (Page 103)

● The document feeder input tray or output bin might contain more than the maximum number of pages.
Make sure the paper stack fits below the guides in the input tray, and remove pages from the output
bin.
● Verify that there are no pieces of paper, staples, paper clips, or other debris in the paper path.
● Clean the document-feeder rollers and the separation pad. Use compressed air or a clean, lint-free cloth
moistened with warm water. If misfeeds still occur, replace the rollers.
● From the Home screen on the product control panel, scroll to and touch the Supplies button. Check the
status of the document-feeder kit, and replace it if necessary.
Clean the pickup rollers and separation pad in the document feeder
If the product document feeder experiences paper-handling problems, such as jams or multiple-page feeds,
clean the document-feeder rollers and separation pad.
1. Open the document-feeder cover.
ENWW Product does not pick up paper or misfeeds 93