HP Color LaserJet Pro MFP M476 series User Manual
Page 84
3.
On the Device Information page, the default product name is in the Device Status field. You can change
this name to uniquely identify this product.
NOTE:
Completing the other fields on this page is optional.
4.
Click the Apply button to save the changes.
Manually configure IPv4 TCP/IP parameters from the control panel
Use the control-panel menus to manually set an IPv4 address, subnet mask, and default gateway.
1.
From the Home screen on the product control panel, touch the Setup button.
2.
Scroll to and touch the
Network Setup
menu.
3.
Touch the
TCP/IP Config
menu, and then touch the
Manual
button.
4.
Use the keypad on the touchscreen to enter the IP address, and touch the
OK
button. Touch the
Yes
button to confirm.
5.
Use the keypad on the touchscreen to enter the subnet mask, and touch the
OK
button. Touch the
Yes
button to confirm.
6.
Use the keypad on the touchscreen to enter the default gateway, and touch the
OK
button. Touch the
Yes
button to confirm.
74
Chapter 8 Manage the product
ENWW