HP SAN Virtualization Services Platform User Manual
Page 73
limited to the number of member LUs times the capacity of the smallest member LU. The remaining
capacity is not available. Therefore, it is recommended that all members of a stripe set be of the same
size.
To create a stripe set:
1.
In the navigation tree, expand the Entities node.
2.
Right-click the Stripe Sets node.
3.
Select New. The Create Stripe Set wizard opens to the Enter Stripe Set Parameters screen.
Figure 11 Create Stripe Set wizard—Enter Stripe Set parameters screen
.
4.
In the Stripe Set name field, enter a name for the stripe set.
5.
In the Comment field, enter any text you want.
6.
Click Next. The Select Back-End LU(s) screen appears.
Figure 12 Create Stripe Set wizard—Select Back-End LU(s) screen
.
7.
Select a back-end LU that you want to add to the stripe set. Back-end LUs that are already
configured, absent, or not accessible are not selectable.
SAN Virtualization Services Platform Manager User Guide
73