HP StorageWorks 2.32 Edge Switch - Manual (Page 104)

Optional HAFM features 104
• To enable Switch Binding (check mark is not in the Enable Switch Binding check box),
click the Enable Switch Binding check box to add a check mark. Go on to step 3 to set
the Connection Policy.
3. Click one of the Connection Policy options.
• Restrict E_Ports—Select if you want to restrict connections from specific switches to switch
E_Ports. Switch WWNs can be added to the Switch Membership List to allow connection
and removed from the Membership List to prohibit connection. Devices are allowed to
connect to any F_Port.
• Restrict F_Ports—Select if you want to restrict connections from specific devices to switch
F_Ports. Device WWNs can be added to the Switch Membership List to allow connection
and removed from the Membership List to prohibit connection. Switches are allowed to
connect to any E_Port.
• Restrict All—Select if you want to restrict connections from specific devices to switch F_Ports
and switches to switch E_Ports. Device and switch WWNs can be added to the Switch
Membership List to allow connection and removed from the Membership List to prohibit
connection.
4. Click Activate to enable the changes and close the dialog box.
5. Edit the Switch Membership List through the Switch Binding – Membership List dialog box to add
or remove switches and devices that are allowed to connect with the switch.
Editing the Switch Membership List
1. Choose Configure > Switch Binding > Edit Membership List from the Element
Manager window. The Switch Binding – Membership List dialog box displays ( Figure 65 ).
The WWNs of devices and switches that can currently connect to switch ports are listed in the
Switch Membership List panel.
Figure 65 Switch Binding Membership List dialog box