HP StorageWorks 2.32 Edge Switch - Manual (Page 57)

HA-Fabric Manager user guide 57
Creating a user group
To create a user group and specify access to certain features and views in the application:
1. Select SAN > Users from the HAFM menu bar.
The HAFM 8.6 Server Users dialog box opens (
Figure 19 on page 52).
2. Click Add located below the Groups table.
The HAFM Group dialog box opens (
Figure 24 ).
Figure 24 HAFM Group dialog box
3. Enter information for the new user group in the following boxes:
• Name
• Description
4. If you want to assign permission to use only certain views, proceed to step 9 .
If you want to assign permission to use certain features, proceed to step 5 .
5. Select the features for which you want to provide read/write access in the features list.
6. Click next to the Read/Write list.
The features are moved to the Read/Write list.
7. Select the features for which you want to provide read-only access in the features list.
8. Click next to the Read Only list.
The features are moved to the Read Only list.
9. Click the Views tab.
10. Select the views you want the user group to be permitted to access in the available views list.
11. Click to move the selections to the Selected Views list.