Arturia MOOG MODULAR 2.6 - Manual (Page 125)

ARTURIA – MOOG MODULAR V 2.6 – USER’S MANUAL 125
Sequence 2 complete
9.2.3 Sequence #3
Reuse again the melodic sequence #1 and complete it by adding another type of modulation.
For example, make a variation on the opening frequency of filter1 (“frequency”), which will be
managed by the second line of knobs. Then the third line on a second VCO and finally the
fourth on the opening frequency of filter2.
Connect the square of the fourth oscillator (in order to create a second melodic sequence,
different from the first) to the audio input of filter2 and choose the “Low Pass Filter” type
for this filter.
Place filter 1 on the “S2” output of the sequencer: click several times in the small display at
the bottom of the module to show its characters.
Filter1 on the “S2” sequencer output
Place the second “driver” on the “S3” sequencer output.