Arturia MOOG MODULAR 2.6 - Manual (Page 81)

ARTURIA – MOOG MODULAR V 2.6 – USER’S MANUAL 81
There are 16 independent amplifiers. Each has its own volume setting with the rotating “level”
button and its amplitude modulation input.
These amplifiers can be regrouped to form mixers. To group 2 amplifiers, just click on the
“Link” button separating them.
When 2 amplifiers form a group, the output signal of the first corresponds to the sum of their
collective outputs, whereas the output of the second remains identical to the signal before
grouping.
To restore their independence, just click on the “Link” button.
It is possible to add as many amplifiers as necessary. In this case it is still the output of the
first amplifier, which will have the signal corresponding to the sum of all of the amplifiers of
the group, the others retaining their independence.
Thanks to this method, with 16 amplifiers to begin with, it is possible to create a large range of
mixing while keeping a few amplifiers available for modulation.
We can, for example, form a group of the first six amplifiers to mix the first six oscillators,
then a group with the next 3 to mix the 3 last oscillators, and finally a group with the next 2 to
mix the outputs of 2 filters which will respectively treat the output of the first amplifier and the
output of the seventh. There are 5 remaining amplifiers for modulation or other mixes.
Each amplifier possesses a current limiting function allowing a soft clipping. This function is
activated with the “clip” button. The “inv” button lets you invert the signal, as input to the
corresponding amplifier..
The four right VCA are modulated with a linear function, on the contrary, the other are
modulated with a exponential function.
7.1.8 Trigger delay
Trigger delay
Time 1 Sets the time for the first delay
Trigg 1 Input Choice of trigger input for the first delay
Mode Choice of mode (independent, parallel, series)
Time 2 Sets the time for the second delay
Trigg 2 Input Choice of trigger input for the second delay
Time1
Time2
Mode
Trigg 1 Input
Trigg2 Input